Technical Data; Noise/Vibration Information - Bosch AHS 45-26 Original Instructions Manual

OBJ_BUCH-1572-002.book Page 5 Friday, April 27, 2012 12:10 PM

Technical Data

Hedgecutter
Article number
Rated power input
Cutting length
Tooth opening
No-load stroke rate
Slipping Clutch Torque
Weight according to EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
Hedgecutter
Article number
Rated power input
Cutting length
Tooth opening
No-load stroke rate
Slipping Clutch Torque
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to
h
EN 60745:
a
h
K
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
Bosch Power Tools
AHS 45-26 AHS 50-26
3 600 ... H47 E..
W 550
mm 450
mm 26
-1
min 3 400
Nm 50
kg 3.5
/II
3 600 ...
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
English | 5
AHS 55-26 AHS 60-26
H47 F.. H47 G.. H47 H..
600 600
500 550
26 26
3 400 3 400
50 50
3.5 3.6
/II /II
AHS 65-34 AHS 70-34
H47 J.. H47 K..
W 700
mm 650
mm 34
-1
min 3400
Nm 50
kg 3.7
/II
3 600 ... H47 E..
H47 F.. H47 K..
H47 G..
H47 H..
dB(A) 75
dB(A) 96
dB 1
2
m/s 2.5
2
m/s 1.5
F 016 L70 833 | (27.4.12)
600
600
26
3400
50
3.6
/II
700
700
34
3400
50
3.8
/II
H47 J..
76
97
1
4.0
1.5