Specifications
Item
__________________________________________________________________________________________
Front wheel lug nut torque
________________________________________________________________________________________________________________________________________________________
Rear wheel lug nut torque
________________________________________________________________________________________________________________________________________________________
Steering cylinder bolt torque
________________________________________________________________________________________________________________________________________________________
Rear wheel toe-in
________________________________________________________________________________________________________________________________________________________
Tire pressure
________________________________________________________________________________________________________________________________________________________
Brake pedal free travel
Special Tools
Steering Valve Service Fixture
To avoid distorting or damaging the steering valve when
repairing, do not clamp it directly into a vise. Fabricate
a service fixture (Fig. 6) and use it as instructed (See
Special Tools
Steering Valve Service in the Repairs section of this
chapter).
Figure 6
Page 8 - 4
Specification
45 to 55 ft-lb
30 to 35 ft-lb
130 to 150 ft-lb
0 to 1/8 in.
10 to 15 psi, front and rear
1/2 to 1 in.
®
Groundsmaster
300 Series