Panasonic TC0938450-015CE Operating Instructions Manual page 51


H.264(1): H.264(1) images will be transmitted.

H.264(2): H.264(2) images will be transmitted.

Default: JPEG
Note

When "Best effort" is selected for "Transmission priority" of "H.264", bit rate will vary between the
maximum and minimum rates while images are being transmitted.
[Refresh interval*]
Select the refresh interval from the following.
This setting is validated only when "JPEG" is selected for "Stream type".
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps */ 10fps */ 15fps */ 30fps *

Default: 1fps
Note

When "On" is selected for "H.264 transmission", the transmission interval may be longer than the set
value when any value with an asterisk (*) on the right is selected.
[Image capture size]
Select the image capture size from the following.
This setting is validated only when "JPEG" is selected for "Stream type".
Picture (Camera) mode VGA [4:3]
Picture (Camera) mode VGA [16:9]
Picture (Camera) mode D1

Default: VGA
11 Configure the settings relating to the authentication [User mng.]
QVGA/VGA
Not supported by the Thermal Camera
Not supported by the Thermal Camera
Operating Instructions 51