Table of Contents
Advertisement
Reverse this procedure to install the power connector cable.
Speakers
Description
Speakers
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Service door (see
b.
Optical drive (see
c.
Top cover (see
d.
System board (see
Remove the speakers:
Lift the speaker cable (1) and then remove the speakers (2)
▲
NOTE:
Reverse this procedure to install the speakers.
58
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Service door on page
Optical drive on page
Top cover on page
System board on page
The speaker connection cable was removed when removing the system board.
29), and then remove the following components:
30)
32)
39)
49)
Spare part number
767262-001
Hide quick links:
Advertisement
Table of Contents
