Wlan Module - HP Pavilion 14 Notebook PC Maintenance And Service Manual

3. Remove the TouchPad button board, carefully lifting the cable through the top cover (2) (the cable was
disconnected from the system board when removing the top cover).
4. Remove the TouchPad button board (3).
Reverse this procedure to install the TouchPad button board.

WLAN module

Description
Realtek RTL8188EE 802.11 bgn 1x1 Wi-Fi adapter
Realtek RT8723BE 802.11 bgn 1x1 Wi-Fi + BT4.0 combo adapter
Before removing the WLAN module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service door (see
b. Optical drive (see
c. Top cover (see
Battery on page 29), and then remove the following components:
Service door on page 30)
Optical drive on page
Top cover on page 39)
32)
Component replacement procedures
Spare part number
709848-001
753077-005
47