(AWG10) or larger automotive grade cable to avoid • If you have difficulty in installing this unit cable deterioration or damage to the in your vehicle, contact your Kenwood covering. dealer. • Check that no metal objects (coins, tools, etc.) are left inside the unit to avoid short Cleaning the unit circuits.
Page 3
SPEAKER OUTPUT terminals • Stereo Connections: When you wish to use the unit as a stereo amplifier, stereo connections are used. The speakers to be connected should have an impedance of 2Ω or greater. When multiple speakers are to be connected, ensure that the combined impedance is 2Ω...
Power indicator Power indicator: Power indicator This lamp indicates the status of the unit, including the power supply and protection function, by lighting in red, amber or green or turning off. When power is turned ON, it lights in green for a few seconds, then turns red when normal operation starts.
Page 5
Connection Power and Speakers cable connection (Stereo Connections) ALINE IN (Front) RCA cable (Commercially available part) BLINE IN (Rear) B Left input (White) A Left input (White) CONTROL LINE IN LINE OUT 15Hz MONO 25Hz INFRASONIC P.CON(REMOTE) (MIN) (MAX) (MIN) INPUT FILTER SENSITIVITY(V)
MONO OPERATION LPF 200 English Tri-mode With the KAC-PS500F, a subwoofer can be added easily to the speaker system by marking use of the properties of coils and capacitors. This mode of operation is called Tri-mode. BRIDGED Front speaker INFRASONIC...
Troubleshooting guide Often, what appears to be a malfunction is due to user error. Before calling for service, please consult the following table. Symptom Cause No sound. • Input (or output) cables are (No sound from one side.) disconnected. • The connection of the sigma servo terminals is wrong.