Routing Setup Flow
Before the Inbound Routing feature can be used, the Function Parameters and Address Book
programming is required.
Configure your machine for Internet Fax (See page 109)
Set required parameters to "Valid" in Function Parameters
To use sub-addressing
To use a numeric ID
Refer to Settings for Inbound Routing (see page 141).
Program the transferring station in the Address Book
Program Internet Fax or a remote computer as a transferring destination.
(Program the Email address of the transferring destination in the Address Book.)
Program a G3 fax station as a transferring destination.
(Program the fax number of the transferring destination in the Address Book.)
Refer to Programming the Address Book for Inbound Routing (see page 142).
140
Set the Function Parameter "152 Sub-Addr Routing" (Fax/Email Settings > Fax
Parameters) to "Valid".
Set the Function Parameter "153 TSI Routing" (Fax/Email Settings > Fax
Parameters) to "Valid".