Panasonic DP-C406 Operating Instructions Manual page 116

Use Group Dialling
For transmission to multiple destinations with
group dialling, follow the steps below.
To use a Group button, group dialling needs to be
programmed in Function Parameters. Refer to
Setting for Group Dialling (see page 188).
1
Follow the step 1 and 2 on page 111.
2
Select "Program/Group".
3
Select the Group you want to send to.
Select the same destination again to cancel
a choice.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then the Email transmission
starts.
116