Advanced Operations - Kenwood TK-5910 Instruction Manual

P25 transceiver

Hide thumbs

Table Of Contents

Table of Contents

Your transceiver operations vary according to the functions that your dealer

has programmed onto the transceiver keys. Following is brief overview of the

programmable functions. Refer to those functions which have been programmed

onto your transceiver.

•

2-tone <TK-5710/ TK-5710H/ TK-5810/ TK-5810H only>

Press this key to display the list of -tone codes that has been pre-stored in your

transceiver memory. While viewing the -tone list, press the GRP

keys or rotate the CH control to select your desired code, then press the PTT

switch to make the call.

•

Auto Reply Message

Refer to "vgS-1 OPtiOnal vOice gUiDe & StORage Unit" on page 37.

•

Autodial

Refer to "a

UtODial

•

AUX A

Press this key to activate the Auxiliary A port on the transceiver. When activated,

the

(KCH-4) or

•

AUX B

Press this key to activate the Auxiliary B port on the transceiver. When activated,

the

(KCH-4) or

•

AUX C

Press this key to activate the Auxiliary C port on the transceiver. When activated, the

•

Call Response

Press this key to respond to a private call. When an Individual Call is received, the

Alert tone stops.

•

Channel Down

Press this key to decrease the channel number {page }.

•

Channel Recall

Press this key during Scan to return to the last called zone and channel.

•

Channel Select

Using the CH control, turn clockwise to increase the channel number and

counterclockwise to decrease the channel number {page }.

•

Channel Up

Press this key to increase the channel number {page }.

•

Clock

Refer to "CLOCK" on page 30.

•

Direct Channel 1 ~ 5

Press of these 5 keys to jump to a frequently used zone and channel (pre-

programmed by your dealer). If activated by your dealer, you can set your own

Direct Channels by selecting your desired zone and channel, then pressing and

holding the Direct Channel 1 ~ Direct Channel 5 key for 3 seconds.