Kenwood TK-5910 Instruction Manual page 27

■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Status to enter Status mode or
Selcall + Status to enter Selcall mode.
• When using the Status key to enter Status mode, the target Fleet/ ID is fixed and
cannot be selected. Skip to step 5 to continue.
3 In Selcall mode, press the GRP
select the ID of the station you want to call.
• Alternatively, you can enter a station ID using a DTMF keypad.
4 Press the PF 2 key, to enter Status mode.
5 Press the GRP
status ID you want to transmit.
• Alternatively, you can enter a station ID using a DTMF keypad.
6 Press the microphone PTT switch or the PF 4 key to initiate the Status call.
• "<COMPLETE>" is displayed when the call has been successfully transmitted.
■ Receiving
The (KCH-4) or
ID or text message will appear when a Status call is received.
Press any key to return to normal operation.
■ Reviewing Messages in the Stack Memory
1 Press and hold the key programmed as Selcall, Status, or
Selcall + Status for  second to enter Stack mode.
• The last received message is displayed with the message number.
2 Press the GRP
desired message.
3 Press the PF 1 key to return to normal operation.
• To delete the selected message, press the PF 3 or DTMF # key. To confirm the
deletion, press the PF 2 or DTMF
• To delete all messages, press and hold the PF 3 or DTMF # key for  second.
To confirm the deletion, press the PF 2 or DTMF
and
and keys or rotate the CH control to select the
and keys or rotate the CH control to select the
key.
keys or rotate the CH control to
(KCH-5) icon will flash and a calling
key.