Entering And Positioning The Id Text - Siemens CCIS1337-LP Configuration Manual

10.5.5 Entering and positioning the ID text

Siemens Building Technologies
Fire Safety & Security Products
Open the unit's home page. See Section 7.4 Accessing the unit's home page.
1.
In the Configuration menu, select the menu option Camera and the ID Text
2.
suboption.
The ID Text dialog will appear.
Fig. 11 ID text
Text
Horizontal position
Vertical position
Click Save.
3.
Enter a text here.
The text appears in the browser display and on devices hooked up to
the analog video output on the IP camera.
This text is always visible - not just with an alarm. See
Section 10.5.7 Service configuration.
Text length
Max. 20 characters
Allowed characters
Use only the following characters:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789 : < > - . , ; * / SPACE
NOTE
Lower case letters are converted to upper case.
Any unpermitted characters are replaced by a period.
Determine the position of the text by specifying the horizontal and
vertical position on the live image.
Configuration
41
04.2006