(One Touch Edit - Kenwood DP-SE9 Instruction Manual

Recording only desired tracks
At the time of CD playback, any desired track can
be selected immediately for recording.
When playing an MD with the DM-SE9 (option),
the same procedure can be used to record only
that track on tape.
Recording preparations are required.• (Steps 1 to 4)
1
Play a CD.
Select a mode other than random
play.
2
When you want to record a track being played, press the O.T.E. key.
When recording has been completed, a non-re-
corded portion of 4 seconds will be produced and
the cassette deck part will stop. The CD player will
enter temporary stop condition.
To record a different track, repeat the steps 1 and 2.
If you set CRLS beforehand you can enjoy better re-
cording.
6
O.T.E.
(ONE TOUCH EDIT.....single track recording)
TRACK NO.
0 3
Lights
In case the key is pressed with track No.3
TRACK NO.
0 3
÷ Playback restarts from the beginning of the track being
played and recording starts at the same time.
To end recording in the middle
÷ Both the cassette deck and CD player stop.
Convenient CD recording
R-SE9T/DP-SE9/X-SE9 (En)
DP-SE9
3 4
6 7 8 9
1 : 0 7
11
DP-SE9
3 4
6 7 8 9
0 : 0 5
11
7
37
5
10
5
10