Servicing Broil Burner And Ignitor - Electrolux 30” GAS FREESTANDING RANGES Service Update Manual

Servicing Broil Burner and Ignitor

The broil burner tube and baffl e assembly is
mounted to the top of the oven liner by fi ve mounting
screws.
To remove the burner assembly remove the
screws and slide the assembly to the left far
enough to disengage the end of the burner tube
from the orifi ce spud. The assembly can now be
removed from the oven.
With the broil burner/baffl e assembly removed
the broil ignitor and ignitor cover are accessible.
To remove the broil ignitor you must fi rst discon-
nect the ignitor harness plug located behind the
lower rear cover on the back of the range.
After disconnecting the ignitor harness plug
remove the ignitor cover plate screw and remove
the cover plate. Remove the two ignitor mounting
screws and pull the ignitor harness through the
cut out in the back of the oven liner.
Ignitor Mounting
Screws
SERVICING OVEN BURNERS AND COMPONENTS
Ignitor Cover
Plate & Screw
Screw Locations
Ignitor Harness
Plug
Page 26
Orifi ce Spud
Rear Of Range
P/N 316439221