D 09: Upstream Modem (Starvue Ii Diagnostics; Figure B-10 Starvue Ii Diagnostic - Motorola Digital Consumer Terminal DCT1800 Installation Manual

d 09: Upstream Modem (STARVUE II Diagnostics)

This diagnostic shows the status and operating parameters for the STARVUE II RF return.
Figure B-10
STARVUE II Diagnostic
09 STARVUE II DIAGNOSTICS
STATUS:
FREQUENCY:
LEVEL:
IPPV:
LAST POLL REQ:
6-15-2001
LAST POLL ACK:
6-15-2001
Table B-11
STARVUE II Transmitter Fields
Field Description
Status Indicates the transmitter status with the following variables:
-
t
Frequency Indicates the transmitting frequency.
Level Indicates the approximate power value of the STARVUE II transmitter in dBmV. The
difference between the power value on the diagnostic screen and the actual power of
the STARVUE II module may be ± 5 dBmV.
Indicates the Interactive Pay-Per-View status with the following variables:
IPPV
ENABLED
UNSENT
##
DISABLED
Last Poll Req. Indicates the sequence number of the last poll request received by the set-top. The
time stamp of the last poll request is displayed under LAST POLL REQ:
!
!
Last Poll Ack. Indicates the sequence number of the last poll acknowledge received by the set-top.
The time stamp of the last poll acknowledge is displayed under LAST POLL ACK.
!
!
20:49:33
20:49:33
Idle
Transmitting
IPPV enabled
− − − −
The set-top contains unsent IPPV transactions. The variable
number of unsent transactions.
IPPV disabled
If the set-top has received no poll request, , the sequence number and time stamp
fields display N/A.
If the set-top has received a poll request set-top but its system time has not yet
been initialized, the time stamp field displays NOT AVAILABLE.
If the set-top has received no poll acknowledge, the sequence number and time
stamp fields display N/A.
If the set-top has received a poll acknowledge but its system time has not yet been
initialized, the time stamp field displays NOT AVAILABLE.
Diagnostics
DISABLED
23.000 MHz
39
DISABLED
170
170
DCT1800 Installation Manual
B-17
−
## is the