Miele DA 5966 W Operating And Installation Instructions page 25

a 3 protective installation sheets
for use when installing the chimney
b 1 exhaust connector
for an exhaust duct  6" (150 mm).
c 1 reducer
for an exhaust duct  5" (125 mm).
d 1 non-return flap
for installation in the outlet duct
collar of the motor unit (not for
recirculation mode). Depending on
the device version, the non-return
flap is already mounted.
e 2 protective spacers
for use when fitting the chimney.
f Wall bracket
for securing the hood on the wall.
g Recirculation kit for recirculation
mode
contains diverter, aluminum hose
and hose clamps (not contained in
scope of delivery, available as
optional accessory – see "Technical
Data").
8 screws 3/16" x 2 3/8" (5 x 60 mm)
and
8 plugs 5/16" x 2" (8 x 50 mm)
for attaching to the wall(not for use in
USA / CDN).
The screws and plugs are designed
for use in solid walls only.
Use different fasteners for other wall
construction types.
Make sure that the wall can support
the load.
2 x M 6 locknuts
for mounting the appliance unit.
2 screws 1/8" x 5/16" (3.9 x 7.5 mm)
are not required.
1 lever
for disassembling the chimney.
Installation sheet
Installation
25