Miele DA 5000 D Operating And Installation Instructions
Hide thumbs
Also See for DA 5000 D:
- Operating and installation manual (32 pages) ,
- Operating and installation instructions (32 pages) ,
- Product dimensions (2 pages)
Related Manuals for Miele DA 5000 D
Summary of Contents for Miele DA 5000 D
- Page 1 Operating and Installation Instructions Ventilation System DA 5000 D en - US, CA To prevent accidents and appliance damage, read these instructions before installation or use. M.-Nr. 07 838 020...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 3 Functional description ..........7 Guide to the Ventilation System . -
Page 3: Important Safety Instructions
This appliance is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions installation in these applications may be possible. Please contact your Miele dealer or the Miele Technical Service Department with specific requirements. - Page 4 IMPORTANT SAFETY INSTRUCTIONS d) Before connecting the appliance to the power supply make sure that the ,WARNING voltage and frequency listed on the data plate correspond with the TO REDUCE THE RISK OF A household electrical supply. COOKTOP GREASE FIRE: This data must correspond to prevent appliance damage.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS ,WARNING Do not allow children to play with or operate the appliance or its controls. TO REDUCE THE RISK OF Supervise its use by the elderly or INJURY TO PERSONS IN THE infirm. EVENT OF A COOKTOP Always turn on the hood when using GREASE FIRE, OBSERVE THE the cooktop to prevent damage from...
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Installation g) Do not install this hood over cooktops that burn solid fuel. ,WARNING h) Provided a larger distance is not TO REDUCE THE RISK OF given by the manufacturer of the FIRE, ELECTRIC SHOCK, OR cooktop, follow the minimum safety distances between a cooktop and the INJURY TO PERSONS, bottom of the hood given in the...
-
Page 7: Functional Description
Functional description The ventilation hood works by air extraction. The air is drawn in and cleaned by the grease filter and directed outside. The hood comes equipped with a non-return flap. This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur. -
Page 8: Guide To The Ventilation System
Guide to the Ventilation System... -
Page 9: Guide To The Ventilation System
Guide to the Ventilation System a Covering frame Sensor buttons b Chimney h Indirect lighting c Canopy i Direct lighting The canopy opens as soon as the fan is Use this button to switch the direct turned on. lighting On/Off, and to adjust the brightness. -
Page 10: Operation
Operation Turning on the fan s Automatically switching back the intensive setting ^ Touch the "s" sensor button. The intensive level "4" can be programmed to automatically switch back to level "3" after 10 minutes. ^ Turn off the fan and lights. ^ Press and hold the "5m15"... -
Page 11: Delayed Shut Down "5M15
Operation Direct lighting n Delayed shut down "5m15" If odors or smoke remain in the kitchen The lighting can be used independently after cooking has been completed, the from the fan. Delayed Shut Down feature can be selected to allow the hood to continue Direct lighting on running for either 5 or 15 minutes. -
Page 12: Indirect Lighting
Operation Indirect lighting Checking the grease filter timer Touch the " " sensor button to turn the To check the percentage of time indirect lighting On/Off. already used: ^ Touch the "s" sensor button to turn on the fan. Safety cut-off ^ Hold down the "l"... -
Page 13: Sensor Button Tone
Operation ^ To select a shorter time, touch the Reprogramming the grease filter sensor button "1". timer To select a longer time, touch the The grease filter timer is preset to 30 sensor button "4". hours. This time can be lengthened or Hold the sensor button until the shortened to 20, 30, 40, or 50 hours desired time is set. -
Page 14: Cleaning And Care
To help prevent resoiling, a conditioner ^ Wipe dry using a soft cloth. for stainless steel can be applied. Cleaners are available from Miele. Do not use too much water when cleaning the controls. Water could Glass surfaces penetrate the electronics and cause damage. -
Page 15: Grease Filters
Cleaning and care Grease filters Be sure to support the grease filter The reusable metal grease filters so that it does not fall onto the remove solid particles from the vented cooktop. kitchen air (grease, dust, etc) and help keep the exhaust hood clean. At the latest, clean the grease filter when the "l"... -
Page 16: Re-Setting The Grease Filter Timer
Cleaning and care Re-setting the grease filter Depending on the detergent, timer cleaning the grease filters in a Each time you clean the grease filter, dishwasher may cause permanent also re-set the counter. discoloration of the filter surface. Performance of the filter is not ^ Touch the "s"... -
Page 17: Changing The Halogen Light Bulbs
Cleaning and care Changing the halogen light bulbs ,WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before changing the light bulbs, disconnect the hood from the power supply, see "Important Safety Instructions". To change the halogen bulbs, first open the canopy. -
Page 18: Changing The Fluorescent Light Bulb
Cleaning and care Changing the fluorescent light bulb Disconnect the exhaust hood from the power supply by either removing the fuse, unplugging it, or manually "tripping" the circuit breaker. To prevent damage to the glass cover and the cooking surface, be ^ Rotate the fluorescent tube sure to securely handle the glass approx. -
Page 19: After Sales Service
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. -
Page 21: Installation Instructions
Installation Instructions Read these instructions and the "Important Safety Instructions" before installing this hood. The installation steps are described in the enclosed "Installation Diagram". Leave these instructions with the appliance for the comsumer/user. Information is subject to change. Please refer to our website to obtain the most current product specification, technical &... -
Page 23: Caring For The Environment
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling center about the be biodegradable and recyclable. -
Page 24: Appliance Dimensions
Appliance dimensions The exhaust connection is adjustable. This makes installation possible if the exhaust opening in the ceiling is not centered directly above the cooking surface. A maximum variance of 1 " (40 mm) in each direction is possible. 1) Feed-though for the duct work and the power cord Exhaust connection C 7 "... - Page 25 Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: Miele Cooktops Non-Miele Cooktops Electric Cooktops 24"...
-
Page 26: Structural Support
Structural support The ceiling mounting plate will CAUTION support the weight of the hood. This When cutting or drilling into the wall ceiling plate must be attached to or ceiling, do not damage electrical rigid structural framing that is wiring and other hidden utilities. supported in its entirety by the ceiling joists, or to the ceiling joists directly. -
Page 27: Installation
Installation Protective film Installation accessories The casing is covered with a protective film to prevent scratching during transport. ^ Peel off the film before installing the 8 screws 8 x 60 mm with casing parts. 8 washers to secure the ceiling plate to the ceiling. -
Page 28: Air Extraction
Air extraction Exhaust ducting and connections WARNING – The ducting should be as short and straight as possible, and the number Danger of toxic fumes. of sharp bends should be minimized. Gas cooking appliances release – For most efficient air extraction, the diameter of the duct work should not carbon monoxide that can be be less than 7... - Page 29 Air extraction If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue. Important If the duct work runs through rooms, ceilings, garages, etc. where temperature variations exist, it may need to be insulated to reduce condensation.
-
Page 30: Electrical Connection
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. See back cover for contact information. WARNING: THIS APPLIANCE MUST BE... -
Page 31: Technical Data
Technical data Total connected load..772 W – fan motor....640 W – canopy drive....4 W –... - Page 32 Alteration rights reserved / 0610 M.-Nr. 07 838 020 / 00 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.