Maintenance Console Guide
3.6.3 Upload (from PC to PBX)
Operation
1.
Set the system to the off-line mode.
• Please refer to Section "2.10 Starting Up the KX-TD500 System" for details.
2.
Point to "File" in the Main Menu and click.
• The "File" drop-down menu is displayed.
3.
Click "Upload to PBX" in the drop-down menu.
• Uploading the system programming data from PC to PBX begins.
• When the uploading is finished, the message "I0001: Upload completed. Please
change PBX to on-line mode." will be displayed.
4.
Click
Note
• Uploading the system programming data from the PC to the KX-TD500 System can be
done during off-line mode only (Please refer to Section "3.6.1 Backup.")
202
.
Installation Manual