Maintenance Console Guide
3.4.2 On-site Administration (Local Connection)
You can execute On-site System Administration by connecting your Maintenance Console PC
to the KX-TD500 System directly using an RS-232C Cable.
Operation
1.
Point to "Connection" in the Main Menu and click.
• The "Connection" drop-down menu is displayed.
2.
Point to "Connect" and click "Local" in the drop-down menu.
• "Local Connect" screen is displayed.
3.
Enter the appropriate communication parameters and the System Programming password.
4.
Click
• Communication between the KX-TD500 and a PC begins.
• After a data link is established, choose a desired command from the Main Menu.
Warning to the Customer regarding the System Password
a)
Please maintain the secrecy of the password.
Because a person who knows the password can easily take over the control of any PBX
system in the market and he may proceed to commit toll fraud.
b)
Please select the dealer whom you can trust for the installation and maintenance.
c)
Please change the password periodically.
d)
We strongly recommend that you set the system password to 7 digits for maximum
protection against "hackers."
192
.
Installation Manual