Suzuki Composer Ensemble Easy Assembly

4. a P S
ttaching thE iano to thE tand
(Continued)
E. F.
With the piano rods seated in Under the right front of
the cam locks, rotate the cam locks the keyboard locate the pedal
clockwise 3⁄4 of a turn. control plug. It is coming out of
the top front of the right stand
NOTE:
leg. Plug it into its receptacle on
Do Not over rotate the cam locks. This
the bottom of the piano.
will not make the connection any tighter
and may break the cam lock barrel.
5. P y P
lacing our iano
B.
After you have placed your piano in your home,
now remove all the clear protective film and the
fiberglass tape holding the fallboard in place.
C.
Plug the power
cord into the rear of
the piano and into
A.
Carefully lift and carry your piano to an appropriate wall
its place in your home. receptacle.
G. H.
Locate the speaker connection cables. They have red and white
1⁄4" male plugs. On the back of the piano locate the receptacles push them into the large barrel nut holes
marked speaker 1 2 3 4 and on the back of the stand locate the 2 on the outside of the stand legs.
dual receptacles marked (3 speaker 4) and (1 speaker 2). Using the
connecting cables connect the matching numbers i.e. 1 to 1, 2 to 2,
and so on.
E y n S
njoy our Ew uzuki
I.
Locate the 8 large cover caps and Locate the 4 small cover caps and
push them into the small barrel nut
holes on the inside bottom of the
stand legs.
P !
iano
Questions?
www.suzukipianos.com/hp-275e
Visit
1•800 854 1594
Or Call • •
The Name You Know
Composer Ensemble
Easy
Assembly
Guide
STOP!
DO NOT ASSEMBLE YOUR PIANO
BEFORE READING THIS GUIDE!
IF YOU HAVE ANY QUESTIONS OR PROBLEMS,
DO NOT CALL OR RETURN PRODUCT TO THE STORE
www.suzukipianos.com/hp-275e
Visit
OR CALL THIS TOLL FREE HELP LINE
1 8OO 854 1594
• • •
The Name You Know
HP-275e