9.1.5 +CLIP Calling line identification presentation
Command
set
+CLIP=<n>
read
+CLIP?
test
+CLIP=?
Optional. 07.07 section 7.6. Controls the presentation of +CLIP unsolicited result code or
returns CLIP subscription status from the network. If the product does not support network
status query, <m> shall always equal 2.
9.1.6 +CLIR Calling line identification restriction
Command
set
+CLIR=<n>
read
+CLIR?
test
+CLIR=?
Optional. 07.07 section 7.7. Enables/disables own number sending to network or returns
CLIR subscription status from the network.
<n>:
sets the adjustment for outgoing calls:
0
presentation indicator is used according to the subscription of the CLIR service
1
CLIR invocation
2
CLIR suppression
<m>:
shows the subscriber CLIR service status in the network:
0
CLIR not provisioned
1
CLIR provisioned in permanent mode
2
unknown (e.g. no network)
3
CLIR temporary mode presentation restricted
4
CLIR temporary mode presentation allowed
9.1.7 +COLP Connected line identification presentation
Command
set
+COLP=<n>
read
+COLP?
test
+COLP=?
Optional. 07.07 section 7.8. Controls the presentation of +COLP intermediate result code or
returns COLP subscription status from the network. If the product does not support network
status query, <m> shall always equal 2.
Parameters:
<n >:
parameter sets/shows the result code presentation status in the TA:
0
disable
1
enable
<m >:
parameter shows the subscriber COLP service status in the network:
0
COLP not provisioned
1
COLP provisioned
2
unknown (e.g. no network)
Response
Default
0
+CLIP: <n>,<m>
+CLIP: (0,1)
Response
Default
0
+CLIR: <n>,<m>
+CLIR: (0-2)
Response
Default
0
+COLP: <n>,<m>
+COLP: (0,1)
65/113