7.2.3 &Y Select power-up configuration
Command
Description
set
power-up uses profile 0
&Y[0]
power-up uses profile 1
&Y1
Mandatory when stored profiles are supported. This setting is not a part of the settings that
are stored in a profile. &F command does not affect this setting.
7.3 GSM 07.07
7.3.1 +CGMI Request ME manufacturer identification
Command
Response
execute
+CGMI
Nokia Corporation
test
+CGMI=?
Optional. 07.07 section 5.1.
7.3.2 +CGMM Request ME model identification
Command
Response
execute
+CGMM
Model info (Nokia D211)
test
+CGMM=?
Optional. 07.07 section 5.2. Note that because TA and ME are in a single physical entity,
response of +GMM is identical.
7.3.3 +CGMR Request ME revision identification
Command
Response
execute
+CGMR
SW version
test
+CGMR=?
Optional. 07.07 section 5.3. Response must include product SW version. Note that because
TA and ME are in a single physical entity, response of +GMR is identical.
7.3.4 +CGSN Request ME serial number identification
Command
Response
execute
+CGSN
xxxxxxxxxxxxxxx
test
+CGSN=?
Optional. 07.07 section 5.4. Returns IMEI. Note that because TA and ME are in a single
physical entity, response of +GSN is identical.
+cme error
x
+cme error
x
+cme error
x
48/113