Bosch Classixx 1200 Instruction Manual page 29

Cleaning water inlet
strainers
Release the water pressure
in the supply hose
Cleaning the strainer
at the water tap
To avoid unused detergent from flowing into the drain
during the next wash cycle:
9.
Pour 1 litre / 1 ¾ pt of water into chamber II.
10.
Select the b Drain programme.
This is necessary if very little or no water flows into the
washing machine.
1.
Turn off the water taps.
2.
Turn the programme selector to any programme
(except B Spin and b Drain).
3.
Press the M Start button, and allow the pro
gramme to run for approx. 40 seconds.
4.
Turn the programme selector to Off.
1.
Disconnect the hose from the water tap.
2.
Rinse the strainer under flowing water.
3.
Reconnect the hose.
29