109
43 0
System Programming
Expansion Unit Type
Description
Assigns the type of expansion units to be used in the system.
This allows the system to identify the unit in each expansion unit
location.
Selection
KX-TD8 16
l
Areas 1; 2 = Cl;El /El;Cl
(Cl: 4-CO Line Unit, El: 8-Station Line Unit)
KX-TD1232
l
Master / Slave
l
Areas 1; 2; 3 = Cl;El;E2 / Cl;E2;El/ El;E2;Cl/
El;Cl;E2 /
E2;El;Cl/
E2;Cl;El
(Cl: 4-CO Line Unit, El: 8-Station Line Unit 1, E2:
8-Station Line Unit 2)
Default
KX-TD816: Cl;El
KX-TD1232: Master and Slave - Cl;El;E2
KX-TD816
1.
Enter 109.
Display: Expansion Card
2.
Press NEXT.
Display example: Cl;El
3.
Keep pressing SELECT until the desired selection is
displayed.
4.
Press STORE.
5.
Press END.
Kx-TD1232
1.
i.
2
.:
-.
3.
4.
5.
Enter 109.
Display:
Expansion
Card
Press NEXT to program
Master System.
To program "Slave," press NEXT again.
Display
example:
Master:Cl;El;E2
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
If
oniy one system is in operation, go to step 8.
Press
NEXT to program Slave System.
Display example:
Slave :Cl;El;EZ-
4-40
System Programming