Panasonic KX-TD816 Installation Manual page 254

42 0
Manager Programming
001
_.
System Speed Dialing Number Set
(coiltd.)
-
To store a pause, press PAUSE.
(Refer to Section 3 "Pause Insertion, Automatic.")
- To store the feature number to convert pulse signals to DTMF
signals, press the * # keys.
(Refer to Section 3 "Pulse to Tone Conversion.")
- To prevent the display of all or part of the number, press SECRET
before and after confidential parts of the number. The SECRET
button must always be entered in a pair. Or your entry is not
stored. (Refer to Section 3 "Secret Dialing.")
If you are storing an external number, include the line access code
(default=9, 8 1 through 88) before the number. When dialing, pause is
automatically inserted after the code.
If you are storing an account code, enter the account code before the
line access code.
(Refer to Section 3 "Account Code Entry.")
It is possible to store a number consisting of 25 digits or more by
storing it in two speed dial numbers. A line access code should not be
stored in the second speed dial number.
To go to another speed dial number at steps 3 through 6, press
SELECT and start with step 3.
To display parts of the number which have scrolled off the display,
press + or t.
Program [002] "System Speed Dialing Name Set" is used to give names
to speed dial numbers.
Feature References
Section 3, Features,
Special Features for RX-T7235 - System Speed Dialing
System Speed Dialing
System Programming
3-17