LG AMNH096BTG0 Manuals page 117

Indoor Unit Address setting Method
Using Wired Remocon
AUTO SWING OPERATION SET TEMP
Room Temp
Time
Timer Operation unit Program set
On Off
Set no. Time 01 03 05 07 09
3
17
10
Timer Cancel
11
12
Program Week Holiday
13
Plasma
14
Set/Clr
15
Hour Min
RESET
16
18
Heat Pump Model
Using Wireless Remocon
Signal transmitter
5
6
4
2
CANCEL
7
ON OFF SET
11 AUTO CLEAN
8
13
14
2. Address Monitoring
2.
1) Press 6(Chaos Swing) & 13(Reset) key at the same time then "Address Monitoring Mode"
starts.
2) At the address monitoring mode, pressing 1(On/Off) key, The address that is set is displayed
on a display window of indoor unit.
* notice : The mothod of display and time is different according to indoor unit type.
3) If the remote control is reset, normal mode starts.
* Notice : Confirm that wired and wireless remote control are able to select the address or not.
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
FAN SPEED SUB FUNCTION
1
HI AUTO Heater Preheat
MED JET Defrost Humidify
LO Filter Out door
ZONE 1 2 3 4
11 13 15 17 19 21 23
2
5
6
4
7
8
9
1) Press 5(Jet Cool) & 13(Reset) key at the same time more
than 3 seconds then
"Address Setting Mode" starts.
2) Set the address of indoor unit by using
"Temperature setting" key.
I Range of address : 00 ~ FF
1
Ex)
3
10
9
16
12
15
3) After address setting, pressing 1(On/Off) key, address
setting is finished. The address that is set is displayed on a
display window of indoor unit.
Flip-up door
* notice : The mothod of display and time is different
(opened)
according to indoor unit type.
4) If the remote control is reset, normal mode starts.
1. Press 13(program) and 16(set and clear) key more
than 3 second then "Address Setting Mode" starts.
2. Set the address of indoor unit by using "Temperature
setting" key.
I Range of address : 00 ~ FF
3 A
Ex)
Group Room(Indoor Unit)
No. No.
3. After setting address, press 13(program) and 16(set
and clear) key more than 3 second then "Address
Setting Mode" is finished.
1. Address setting Method
3 A
Group Room(Indoor Unit)
No. No.
- 117 -
Control Devices and Function
LGE Internal Use Only