Siemens A31003-D3000-M100-01-76A9 Administrator User Manual page 160

Administration
Multiline Appearance/Keyset
160
If the user picks up an incoming call for the DSS target by pressing the associated
DSS key, the call is forwarded to the user's primary line. Thereafter, the user's
phone rings, and the user can accept the call.
INFO: To enable the immediate answering of a call via the DSS
key, Allow auto-answer in the User menu must be activated. The
complete path on the WBM is: User Pages > Configuration >
Incoming calls > CTI calls > Allow auto-answer.
The value of Call pickup detect timer (seconds) determines the time interval in
which the deflected call is expected at the primary line. When the call arrives
within this interval, it is given special priority and handling. If a second call arrives
on the primary line during this interval, it will be rejected. If a second call arrives
outside the interval, it will be treated just like any other incoming call. The default
is 3.
If Deflecting call enabled is checked, the user can forward an alerting call to the
DSS target by pressing the DSS key. The default is "No".
INFO: This parameter is configured under System > Features >
Feature access (see Feature Access).
If Allow pickup to be refused is checked, the user is enabled to reject a call
alerting on the line associated with the DSS key. The default is "No".
INFO: This parameter is configured under System > Features >
Feature access (see Feature Access).
The DSS key can be configured to indicate the call forwarding state of the number
represented by the DSS key. This feature is activated when Forwarding shown
is enabled.
Administration via WBM
System > Features > DSS Settings
Administration via Local Phone
|
--- Admin
|--- System
|--- Features
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013