Hitachi CP-TW2503 User Manual page 56

SETUP menu
Item Description
While the image signal from the input port chosen in step (1) is
projected, the image signal from the input port selected in step (2) is
output to MONITOR OUT port.
(1) Choose a picture input port using the ▲/▼ buttons.
Choose STANDBY to select the picture
output in the standby mode.
(2) By using the ◄/► buttons, select
COMPUTER IN1 port or OFF to disable
the MONITOR OUT port for the input port
MONITOR OUT
or standby mode chosen in the step (1).
• If you have changed the setting of STANDBY, it applies only to
the current standby mode, NORMAL or SAVING, selected under
STANDBY MODE, without changing the setting of the other mode.
The factory settings are as follows:
- COMPUTER IN1 for the NORMAL mode of STANDBY MODE
- OFF for the SAVING mode of STANDBY MODE
• It is invalid if MONITOR OUT is not selected under COMPUTER
IN2.
56