Mechanism Deck; Lens Block Assembly, Center Frame - Sony DCR-VX2100 Service Manual

2-11.LENS BLOCK ASSEMBLY, CENTER FRAME ASSEMBLY
PRECAUTION DURING INSTALLATION
When installing it.
Align the swich position.
Lens block assembly
[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the CAMERA Section
To check the CAMERA Section, set the CAMERA to the "forced CAMERA power ON" mode.
Setting the "Forced CAMERA Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press
the PAUSE button of the adjustment remote
commander.
FP-191 flexible board (60P)
Insert the FP-191 flexible board in the opposite
direction to the normal insertion direction.
AC POWER
AC IN
ADAPTOR
DC-IN
connector (3P)
(1-794-637-21)
qd Center frame assembly
6 Screw
(M2 × 3),
lock ace
FP-188 flexible board
Center frame assembly
DD-216 board
Extension cable
(J-6082-496-A) (50P)

Mechanism deck

qs FP-188 flexible board (6P)
5 CJ-064 harness
Exiting the "Forced CAMERA Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote
commander.
3) Select page: 0, address: 01, and set data: 00.
FP-186 flexible board (80P)
Insert the FP-186 flexible board in the opposite
direction to the normal insertion direction.
LA-028 board
VC-358 board
JK-267 board
LANC jack
VIDEO jack
Adjustment remote
commander (RM-95)
2-11
DCR-VX2100/VX2100E
q; Two screws (M2 × 4),
lock ace
qa Two screws (M2 × 3),
lock ace
9 Lens block assembly
8 Two screws
(M2 × 5),
EG grip
7 Two screws
(M2 × 5),
EG grip
2 Tapping screw
(B2 × 5)
1 Screw (M2 × 3),
lock ace
3 CCD cover
4 Screw (M2 × 3),
lock ace
CD-512 board (50P)
Flexible board (27P)
(from VAP assembly)
Lens block assembly
Flexible board (39P)
(from zoom lens assembly)
Monitor TV