Disassembly - Sony DCR-VX2100 Service Manual

The following flow chart shows the disassembly procedure.
2-1. LCD section
(HL-013, PD-217 boards, Inverter transformer unit)
2-2. EVF section (LB-100 board)
2-3. (Upper) handle block assembly
2-5. Cabinet (L) block assembly, Mechanism deck,
VC-358, DD-216, JK-267 boards
(for force eject of cassette and VTR section check)
2-13. Control switch block (PS-4980),
Control switch block (CF-4980)
2-6. Cabinet (R) block assembly
2-7. Cabinet bottom assembly
2-8. Battery panel block assembly
(MK-016, KP-013, MS-209 boards)
2-9. EVF block assembly
2-10. LA-028, DD-216, VC-358, JK-267 boards,
Mechanism deck
2-11. Lens block assembly, Center frame assembly
[Connection diagram for service position (Mainly for voltage measurement and check)]
(CK-140, VC-358, JK-267, CD-512, DD-216, LA-028, KP-013, MK-016, MS-209 boards, Mechanism deck-2)
SECTION 2

DISASSEMBLY

HL-013, PD-217 boards service position
LB-100 board service position
2-4. FK-080, MA-430, MI-050, FT-092, RM-091,
FK-080, MA-430, MI-050, FT-092, RM-091 boards
service position
Mechanism deck service position-1
Service position to check the VTR section
CK-140 board service position
2-14. CK-140 board
2-15. Control switch block (ED-4980),
Service position to check the camera section
2-12. CD-512, SE-147 boards, Zoom lens assembly
2-1
DCR-VX2100/VX2100E
ZM-030 boards
Hinge assembly