Canon imageRUNNER 2530 Service Manual page 260

8) Connect the connector of the bundled repeating harness B to the connector on the card reader.
MEMO:
Connect the repeating
harness B's connector
which is closer to the
clamp to the connector
of the card reader.
11) Secure the repeating harness B with the edge
saddle.
x1
F-9-51 F-9-51
9
Installation > Card Reader Installation Procedure > Installation Procedure
Clamp
x1
F-9-49 F-9-49
12) Remove the two blind seals from the reader left cover.
9 Installation > Card Reader Installation Procedure > Installation Procedure
9) Secure the repeating harness B clamp using the bundled binding screw (M4x6).
10) Disconnect the shorting connector. The removed shorting connector is no longer necessary.
CAUTION:
If the shorting connector
is not disconnected, a
malfunction or error can
result.
iR2545/2535
9-24
x1
x1
F-9-50 F-9-50
iR2530/2525/2520
F-9-52 F-9-52
9-24