Bosch HBL 73 Service Manual page 24

OVEN MODEL SELECTION
This operation is normally executed at the manufacturer facilities.
If the display board has to be replaced, the oven model must be
reconfigured. At first power-up, the Double Oven is always
configured as a 30" both multifunction cavities.
MANUAL TEST ACCESS
1. Press CANCEL key.
2. Turn the knob 4 detents CW.
3. Turn the knob 6 detents CCW.
4. Press START key.
5. The writing MANUAL TEST is displayed.
To reconfigure the oven model as a different double:
1. Press [Cooking Mode] key.
2. Turn the knob to select the correct oven model.
N° MOD DISPLAY
1 C 30 CONVECT 2
3 D 30 THERMAL 2
5 G 27 CONVECT 2
7 H 27 THERMAL 2
3. Press [Start] key to accept the new selection, the control
sounds a tone.
4. Press [Cooking Mode] key again to quit the oven model menu
and going back to manual test procedure.
PROCEDURE:
OVEN MODEL
30" DOUBLE OVEN
MULTIFUNCTION/MULTIFUNCTION
30" DOUBLE OVEN
MULTIFUNCTION/THERMAL
27" DOUBLE OVEN
MULTIFUNCTION/MULTIFUNCTION
27" DOUBLE OVEN
MULTIFUNCTION/THERMAL