Bosch HBL 73 Service Manual page 15

BSH wall ovens
Series 700
To clean the cavity and the inner door never use any metal tool.
1.
After the Pyrolytic Cleaning process use only a damped cloth or
sponge with dish soap for final cleaning of the surfaces.
Grids and cookie sheets must always be removed before using the
2.
Selfcleaning mode. Otherwise chromed metal grids wiII be
discolored and not be shiny anymore.
The cleaning time can be chosen between 2- 4 hours depending on
3.
the Ievel of soil the cavity has collected.
If the door gasket has become dirty it should only be cleaned very
4.
carefully with a damped and soaped rag. Consider that the
Selfcleaning process wilI not clean the gasket.
Particles or dust between the glass Iayers of the door window can
5.
only be cleaned after disassembling of the complete door. This
operation should only be done by an authorized service technican.
The front surface of the unit should be cleaned only with soapy
6.
water and a rag or sponge.
Stainless steel panels must be carefully cleaned with a soft damped
7.
rag or sponge and dish soap. Never use any rubbing materials Iike
metal wool, abrasive sponges or scouring pads of any type. This wiII
create shiny marks or scratches which never can be repaired and wiII
remain. Clean the stainless steel panels always only in one direction
and follow the satinated structure on the panels.
Maintaining And Cleaning
FULGOR - Training