Pole Mounted Installations - Motorola AP 7161 Installation Manual

22
Ancillary hardware to attach the extension arm to the mounting hardware kit sections is included in the extension arm kit.
Description
1/2 inch hex head nut
1/2 inch x 3/4 inch hex head bolt

Pole Mounted Installations

The mounting hardware kit and extension arm can be used in various combinations to properly install the AP 7161 on a pole. For
poles of up to 3 inches in diameter, attach the pole mount section of the mounting hardware kit at the desired position on the
pole using a 1/2 inch U-bolt and nuts. For poles greater than 3 inches in diameter, attach the pole mount bracket section using
band clamps.
The U-bolt and band clamps are not included in the mounting hardware kit.
NOTE
CAUTION
Quantity
2
2
Use of the extension arm is recommended for installations on poles greater than 3 inches in
diameter.
Always mount the AP 7161 with the black gore vent facing down.
AP 7161 Access Point Installation Guide