Ap 7161 Antenna Options - Motorola AP 7161 Installation Manual

Hide thumbs Also See for AP 7161:
Table of Contents

Advertisement

14
The optional dual band antenna can be mounted on the connectors marked R3-A and R3-B.
WARNING!

AP 7161 Antenna Options

The AP 7161 access point supports options for 2.4 GHz, 5 GHz, and a dual band antenna. The AP 7161 can be purchased in a
three radio configuration. If a three radio unit is purchased, the access point ships with two dual band antennas that should be
connected to ports R3-A and R3-B. This is in addition to the other antennas available for the other two radios. The single
antenna supporting the third radio supports sensor mode only and can not function as a WLAN radio. See
page 8
for more information.
WARNING!
Antenna ports where no antenna is mounted must be properly terminated using
an approved IP67 terminator.
Antenna ports where no antenna is mounted must be properly terminated using
an approved IP 67 terminator.
AP 7161 Access Point Installation Guide
AP 7161 Antennas on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents