D-Link AC750 User Manual page 128

Section 7 - Troubleshooting
4..What.happens.if.the.power.is.cut.during.firmware.upgrade?
.
If you can't connect to your device or are having a problem connecting to the admin page, your router may be in recovery
mode. This is indicated by a steady blinking orange Power/Status LED.
To recover your device:
• Connect an Ethernet cable from the router to your computer.
• Open a web browser and enter the IP of your router
(http://dlinkrouter or http://dlinkrouter.local. or 192.168.0.1)
and press Enter.
• The page will show D-link Router Recovery Mode. Click
Browse to select your current or a newer firmware.
• Click Open to load it.
• Click Upgrade.
• When the screen shows "Upgrade Successfully", unplug the
Ethernet cable and power off and on the device.
• Please refer to "Connecting to Your DIR-510L" on page 14 to
setup your router.
D-Link DIR-510L User Manual 124