Windows® Xp - D-Link AC750 User Manual

Section 6 - Connecting a Wireless Client
Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service
Pack 2 users. If you are using another company's utility, please refer to the user manual of your wireless adapter for help with
connecting to a wireless network. Most utilities will have a "site survey" option similar to the Windows® XP utility as seen below.
If you receive the Wireless.Networks.Detected bubble, click on the
center of the bubble to access the utility.
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select View.Available.Wireless.Networks.
The utility will display any available wireless networks in your area. Click
on a network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check your TCP/
IP settings for your wireless adapter. Refer to the Networking.Basics
section in this manual for more information.
D-Link DIR-510L User Manual
Windows® XP
or
117