Dubbing; Dubbing A Tape Onto A Disc - Pioneer DVR-RT401-S Operating Instructions Manual

Dubbing

08
Chapter 8
Dubbing

Dubbing a tape onto a disc

VR mode Video mode DVD-R
You can record video or audio on a video tape onto a
disc.
Preparation:
• Turn ON the TV and set to the video input mode.
• Load a source video tape and a disc for recording.
• Remove the erase-protection tab of the source
video tape to prevent the data from accidentally
being erased.
• Confirm the disc space before operation.
1 Press DVD/VCR to set this unit to DVD mode.
The DVD indicator will light.
2 Press REC MODE/SPEED and select the recording
mode.
• When REC MODE/SPEED is pressed each time,
"SP", "LP", "EP" or "XP" is selected in this order.
• The recording mode is indicated on both the TV
78
screen and the display window.
En
• For the details of the recording mode, see page 52.
2G00201B_En_72_80
VCR
78
3 Press DVD/VCR and set the unit to VCR mode.
Confirm that the VCR indicator lights.
4 Press DUBBING.
• The unit is changed to DVD mode automatically.
• The VCR is waiting for playback and the DVD is
waiting for recording. Then the following message
will appear.
5 Press DUBBING, or press
and press ENTER.
Dubbing starts.
• To cancel dubbing, press STOP, or select "NO" and
press ENTER.
CONFIRM DUBBING FROM VCR TO DVD
YES
SELECT DUBBING
ENTER ENTER STOP
During dubbing, VCR playback, DVD recording and
"dub" (dubbing) indicator appear on the display window.
Video playback
Press CLOCK/COUNTER to display the elapsed dubbing
time in the display window.
6 To stop dubbing, press STOP.
Note
• Dubbing cannot be accomplished when
- a copy protected tape is used.
- disc protection is set.
- a disc has no recording space.
• Dubbing stops when
- the video tape is played back to the end and stops.
- recording space becomes full.
• The videos recorded from TV programs or movies
can be used only for your personal enjoyment
without permission of the copyright holder.
8/4/05, 10:59
or to select "YES"
NO
YES
NO
DVD recording