Electrolux Next Gen 30" Service Manual page 118

Top burner knobs:
1. To remove the top burner knobs, pull the knob
straight off.
Top burner knob
Control panel:
1. The control panel is held in place by two screws at
the top.
Control panel top screws
2. Disconnect power and remove the screw on the
lefthand side that hold control panel to the bodyside.
Side screw
3. Open the oven door and remove the two screws
holding the control panel to the front frame.
Control panel front frame screws
4. Pull out on the bottom of the control panel.
Top burner igniter switch:
1. Disconnect power, remove the control panel, unplug
wires from the switch and slide switch off valve stem.
Igniter switch
Top burner valve:
1. Remove the main top, control panel and burner for
the valve that is to be removed.
2. Disconnect power and remove the one bolt holding
the valve to the manifold pipe with a 1/4 spin tight.
Drop the valve down and slide the igniter switch off.
118
Bolt