Headset Sense Test; Configurations - Motorola MC3000 Operating And Installation Manual

Installation
Configuring and Testing Deskset Functions

7) Headset Sense Test

To check that the headset is connected to the deskset:
1. After you enter the program, press the Mode Up button six times to change the test to
the "Headset Sense Test" which is the seventh test option. The first line of the LCD
display will show "Headset Sense". The second line of the LCD display will
show"Press Menu".
2. Press the Menu/Home button to enter the sub-menu. The test will run automatically in
real time as you plug and unplug the headset. The second line of the LCD display will
show "Connected" or "Disconnected" according to what the deskset senses at the
deskset "Headset" connector.
3. Press the Menu/Home button to exit the sub-menu. The first line of the LCD display
will show "Headset Sense". The second line of the LCD display will show "Press
Menu".

Configurations

The power must be connected before you can program parameters. Once in the Configu-
ration and Test program, the LCD display shows two lines; the first line states which of the
parameters you are currently setting. You must then enter the sub-menu to access the
parameter values, select the desired value and exit the sub-menu.
To enter the Configuration and Test program:
1. Press and hold the Shift button and then press the Sel button. When you enter the
test program, the first line of the LCD display will show the "Button Test" and the sec-
ond line will show "Button:".
2. At any time you can press and hold the Mode Up or Down buttons to move up or
down the menu options. Options (8 -18) on the menu are deskset parameters that you
can configure.
To enter a sub-menu:
1. When you have accessed the desired parameter in the main menu, press the Menu/
Home button to enter and exit the sub-menu.
2. At any time you can press and hold the Mode Up or Down buttons to move up or
down the sub-menu items.
To exit the Configuration and Test program:
1. In the main menu, press the Sel button to exit the Configuration and Test program.
Note: You must exit the Configuration and Test menu to save the configuration settings.
Once in the Configuration and Test program, the following options (8 -18) on the menu are
deskset parameters that you can configure:
• 8) Configure Radio Type
• 9) Configure Busy Polarity
• 10) Configure Parallel Unit Mode
• 11) Configure Auto-Level
2-18
MC3000 Digital Deskset Operator and Installation Manual
(6880309L15-A)