Mounting F9811 Printer - Fujitsu 9811 ATB Operator's Manual

Installing the Printer

5. Mounting F9811 printer

Printer and Secure Bin are installed as illustrated below.
1. Change metal plate on the bottom of the printer to the new plate supplied and fix it with supplied screws.
Refer to photos A and B.
2. Slide the printer into a hook of the bin and fit the rear of the printer with the bin . Photo C and D.
3. Screw the printer to the bin with the two wing head screws. Photo D.
4. Clamp a power cable and communication cable to the printer.
Keep enough slack of the cables between the connectors and cramps
Metal plate New metal plate
Photo A Photo B
Photo C Photo D
fit to rear
Hook
Photo E
14