Viewing Data Statistics; Viewing Encryption Status - Motorola MTM5400 Feature User Manual

Feature User Guide
For transferring data from a standard computer over the air connect the computer via the Data Cable
GMKN1022 with your radio. Your service provider has to setup additional applications on your computer.
If set up by your service provider it is possible to accelerate the transmission by using the Multi-Slot Packet Data
(MSPD) Service.

5.15.1 Viewing Data Statistics

Procedure Steps
1 From the home screen, press MENU key.
2 Select More . . . → Packet Data.
Data services are only available in TMO Mode. The data option must be set to Voice & Data or Data
Only.
3 Select one of the following:
• Sent Data — the number of KBsSent and Throughput since current Packet Data activation is
displayed.
• Received Data — the number of KBs Sent and Throughput since current Packet Data activation is
displayed.
• Bandwidth — active data session percentage is shown.
• Failed Transfer — the percentage of failed sent/received packets.
N.A. — standby packet data session.

5.15.2 Viewing Encryption Status

Procedure Steps
From the home screen, press MENU key.
1
2 Select More . . . → Packet Data → Encryption.
The encryption state of the ingoing packet data session is displayed:
3
• Packet Data Channel Clear
• Packet Data Channel Encrypted
• Encryption N/A (clear)
5-48 -