Motorola VC6000 Series Product Reference Manual page 34

2 - 6 VC6000 Series Product Reference Guide
6 Pin Deutsch Telemetry Cable
NOTE The 6 Pin Deutsch Telemetry Cable only supports heavy-duty vehicle bus type SAE J1708.
The 6 Pin Deutsch Telemetry Cable supports protocol 1708 interface with Heavy-Duty type bus (SAE J1708)
Connect J1 serial connector into the Auxiliary port of the VC6000 Series (see
1.
connector's fastening screws.
NOTE Use the 50 Pin Accessory Cable (see 50 Pin Accessory Cable on page 2-7) to adapt betwwen the 6 Pin Deutsch
Telemetry Cable and the Auxiliary port of the VC6000 Series.
Connect J2 plug to the telemetry receptacles of the vehicle data bus (see
2.
J1, 9 PIN (D-type - Male) to VC6000 Series Auxiliary port
6 Pin Deutsch Telemetry Cable
Figure 2-6
9 Pin Deutsch Telemetry Cable
Connect J1 serial connector into the Auxiliary port of the VC6000 Series (see
1.
connector's fastening screws.
NOTE Use the 50 Pin Accessory Cable (see 50 Pin Accessory Cable on page 2-7) to adapt betwwen the 9 Pin Deutsch
Telemetry Cable and the Auxiliary port of the VC6000 Series.
Connect J2 plug to the telemetry receptacles of the vehicle data bus (see
2.
J1 (D-type - Male) to VC6000 Series Auxiliary Port via 50
9 Pin Deutsch Telemetry Cable
Figure 2-7
via 50 Pin Accessory Cable
Pin Accessory Cable
Figure 2-6). Close the
Table 2-2).
J2 to vehicle Deutsch 6 Connector (HD16-6-12s)
Figure 2-7). Close the
Table 2-2).
J2 To vehicle Deutsch 9 Connector
(HD17-9-1939s)