Motorola VC6000 Series Product Reference Manual page 141

Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
4.
Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector on the bottom and
5.
back of the VC6000 Series. Do not leave any cotton residue on the connector.
Repeat at least three times.
6.
Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
7.
Use a dry cotton tipped applicator and repeat steps 4 through 6.
8.
Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the surface.
9.
CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.
Inspect the area for any grease or dirt, repeat if required.
10.
Cleaning Frequency
The cleaning frequency is up to the customer's discretion due to the varied environments in which the VC6000
Series are used. They may be cleaned as frequently as required. However when used in dirty environments it may
be advisable to periodically clean the screen to ensure optimum performance.
Maintenance & Troubleshooting 10 - 3