Radio Operation - Silvercrest SWEP 500 A1 Operating Instructions Manual

GB/CY
Call up and activate the countdown function
• Press and hold down the
the screen shows 0. 00 D.
• Select the desired, saved countdown time with the aid of the
memory buttons.
SNOOZE
• Press
pauses the countdown.
When the set time has been counted down, an alarm sound plays for one
minute becoming gradually higher in tone and louder.
• Press the
countdown mode.

Radio operation

Switching on / volume control
• Press the
the screen, followed by the current frequency and band selection.
• Press the
Vol.–/AL–2
Button
Vol.+/AL-1
Button
Switch on bass amplifier
• When the radio is switched on, press the
bass amplifier. The screen will flash BASS.
• In order to switch the bass amplifier off again, press
time. The BASS message disappears.
Switch display message
• In radio operation press the
the time and frequency.
MEMORY SCAN
to start the countdown. Pressing the
MEMORY SCAN
button to pause the countdown and leave
POWER
button to switch the radio on. ON will appear briefly on
Vol.+/AL–1 Vol.–/AL–2
or
: quieter;
: louder.
button for around 2 seconds,
button to control the volume:
BASS
MODE
button to switch between displaying
- 22 -
M.0/5
SNOOZE
button again
button to switch on the
BASS
one more
M.4/9
–