Samsung DCS Manual page 51

6. Press TRSF to store and exit OR
press SPEAKER to store and advance
to next program
Programmable Feature Keys
KCMMC
AAPLAY: Play Auto Attendant messages
AAREC: Record Auto Attendant messages Default password is 4321
AB: * DCS 70 ONLY. Absent feature. When activated at a station display will read
ABSENT. DSS keys for that station programmed on other keysets will flash. It
is still possible to call stations in absent mode.
ABAND * View abandoned call CLIP details Default password = 1234
ACCT: * Account code entry
ALARM: Alarm ring answer key Passcode under TENANT/PASSCODES Alarm sensor
ring
AN/RLS: DCS 70 ONLY. Answer / Release key
BARGE: Executive Barge-in or Override.
BLOCK: OHVA block. Blocks OHVA to the station
BOSS: Set up for BOSS or SEC. Allows intercom calls between parties, flashes on
SEC when BOSS sets DND and all calls to Boss extension divert to Sec.
CALL: Termination point for calls to keysets for C.O calls (if no DTS keys assigned),
Intercom calls and Indial calls. – 1
is suggested that these remain.
CAMP: Camp On key. Useful on Non display keysets
CANMG: Cancel Message. Cancels messages.
CBK: Call back. Allows you to set a callback on a busy station or outside line when it
becomes free.
CONF: Conference. Allows up to 4 other parties (with a maximum of 2 external) to join
in a conversation,.
CLIP: Calling line identification presentation. Displays outside callers number when
available
CR Call Recording
CS: * UCD Call Waiting Status. Provides flashing indication when calls in UCD
queue reach the number as set in MMC 500 UCD CS level indication. This key
must be programmed with a group extender eg.510
CNSR: * CLIP Number Saved Redial. Whilst on an incoming call pressing this key will
save the CLIP number, pressing this key later will redial that CLIP number.
DICT: When on a call, allows you to leave up to 3 13 character messages or memos
on your LCD which can be recalled later.
DIR: Directory. Alpha search of numbers stored in Personal/System speed dials or
station directory. An extender may be added: 1=Personal 2=System 3=Station
DLOCK: Door Lock. Operates door unlock feature.
DND: Do Not Disturb
DP: Directed Call Pick up. A specific Station or group number can be specified.
DROP: Transfer Call Drop.
DS: Direct Station Select. Station number must be specified.
DT: Direct Trunk Select. External line number must be specified.
EXTMIC External microphone key when Full Duplex handsfree option is added to
Falcon 18 and 28 Button Keysets. Switches external microphone(s) in or out.
FAUTO Forced answer. When dialling another Keyset, on hearing ring tone pressing
this key will auto answer the remote called station setting up an intercom
hands free call.
FLASH: Flash. Sends hookflash to the outside line.
FWRD: Forward. If only FWRD entered user will need to input forward option
presented on LCD activated via soft keys. An extender can be assigned to this
key 1=All 2=Busy 3=No Answer 4=Busy/No Answer 5=Follow Me 0=Cancell
call forward.
Page 42
Feature Description
st nd
& 2 keys are CALL keys by default and it