Samsung DCS Manual page 45

3.38 PROGRAM AUTOMATIC NIGHT MODE OPERATION
Allows the System Administrator to set the time the system will enter into night mode automatically by
utilising time and day tables. A NIGHT key is not needed as the system will switch automatically.
However, it is helpful to have a dedicated button so the status can be manually changed. The start time
is the time the system will switch from day to night service the end time is the next day (eg., start 1730
WED, end 0800 THUR) This prevents entering of start and stop times on the same day.
FEATURE KEYS
0 SUN
1 MON
2 TUE
3 WED
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Press TRSF 507
Display shows
2. Dial day number (0-6 eg., 3) OR
press UP or DOWN key to select day
and press RIGHT soft key to advance
cursor to step 3
3. Dial in start time for night (eg.1730)
If time entered is valid, cursor moves
to end time enter end time If time
entered is valid, the system returns to
step 2
4. Press TRSF to store and exit OR
press SPEAKER to store and
advance to next program
Page 36
4 THU
5 FRI
6 SAT
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next program
Used to clear previous entry
DISPLAY
NIGHT TIME (SUN)
ST : _ END :
NIGHT TIME (WED)
ST : _ END :
NIGHT TIME (WED)
ST : 1730 END : 0800