Enter Username and password (default username is admin, password is admin), then
click "login". Once the login is successful, the home page will be displayed:
Note:
1) You have to add a network segment same with the WAN port if your PC is not at
192.168.1.XXX.
2) For safety requirement, please modify the username and password after you login.
You can modify in this page: "System"---"Management"
3) Generally, based on the default setting, if user didn't do anything in 1 min after login,
system will reflect it's over time. If you want to continue operating, please login again.
If username and password are right, this following page will be displayed:
Network
WAN/ LAN Port IP will be displayed
Storage
Total storage and used storage will be displayed
8