Throttle Body And Intake Manifold - Suzuki Jimny Service Manual

6A1-18 ENGINE MECHANICAL (M13 ENGINE)

Throttle Body and Intake Manifold

1. Intake manifold
2. Intake manifold gasket
3. Throttle body
4. Gasket
5. EGR pipe
6. MAP sensor
7. EVAP canister purge valve
8. TP sensor
9. IAC valve
10. Fuel delivery pipe
11. Engine hook
12. Intake manifold stiffener
REMOVAL
1) Relieve fuel pressure referring to "Fuel Pressure Relief Pro-
2) Disconnect negative cable at battery.
3) Drain coolant by loosening drain plug (1).
13. Intake manifold mounting nut
14. Intake manifold mounting bolt (short)
15. Intake manifold mounting bolt (long)
16. EGR pipe gasket
17. O-ring
18. Grommet
cedure" in Section 6.
WARNING:
To help avoid danger of being burned, do not remove
drain plug (1) and radiator cap while engine and radiator
are still hot. Scalding fluid and steam can be blown out
under pressure if plug and cap are taken off too soon.
19. Injector assembly
20. Cushion
Tightening torque
Do not reuse