Advertisement
Troubleshooting
Should you have a problem with your speaker system, check the
following list and take the suggested measures. If the problem
persists, consult your nearest Sony dealer.
No sound.
• Check that both this unit and the source device are turned on.
• Turn up the volume of the unill
T-IIrn up the volume of the sourCe device as high as possible
to the extent that sound is not distorted. For details on volume
adjustment, refer to the operating instructions supplied with
the device.-
• Make sure alJ'the .connections have been correctly made.
Low sound level.
• Turn up the volume of the source device as high as possible
to the extent that sound is not distorted. For details on volume
adjustment, refer to the operating instructions supplied with
the device.
• Turn up the volume of the unit.
Distorted sound.
• Turn down the volume of the source device to the point
where the sound is no longer distorted. For details on volume
adjustment, refer to the operating instructions supplied with
the device.
• If the source device has a bass boosts function, set it to off.
• Turn down the volume of the unit.
There is hum or noise
iii
the speaker output.
• Make sure all the connections have been correctly made.
• Make sure none of the audio devices are positioned too close
to a TV set.
The brightness of the
(9
indicator is
unstable.
The brightness of the
(!)
indicator may become unstable when
the volume is turned up. This is not a malfunction.
The battery cannot be inserted, or fits too
tightly in the Card Remote Commander.
The battery is designed so as not be inserted in the wrong
direction. Confirm polarity
(+1-)
and insert correctly.
Card Remote Commander operation is not
possible.
Operate the card remote commander pointed toward the
remote sensor of the speaker.
Remove any obstacle between the speaker and the card
remote commander.
Avoid exposing the remote sensor of the speaker to strong
light (direct sunlight or fluorescent lamp of high frequency
lighting).
If the above remedies do not solve the problem, the battery
might be worn out. Replace it with a new one.
57 mm, Full range, magnetically
shielded
Bass reflex
40
20W
40W
Specifications
Speaker section
Speaker system
Enclosure type
Impedance
Rated input power
Maximum input power
Input
Input impedance
Amplifier section (Left speaker)
Rated output
20 W + 20 W
(10
%
T.H.D., I kHz, 4 0)
Stereo mini jack
X
2
4.7
Jill
(at I kHz)
General
Power
Dimensions (wilt/d)
Mass
DC 16
V
(supplied AC power adaptor)
Approx. 80
x
187
x
169 mm
(3
'I,
x
7
'Is x
6
'I,
in.)
Approx. 1,200 g (2 lb. II oz.) (left
speaker)
Approx. 1,100 g (2 lb. 7 oz.) (right
speaker)
Supplied accessories
AC power adaptor
(I)
Mains lead
(I)
Connecting cord (stereo-mini plug
+-+
stereo-mini plug, I m) (I)
Card Remote Commander (I)
Operating Instructions
(I)
Warranty
(I)
The warranty is not provided in some areas.
Optional accessories
Connecting cord RK-G22, RK-GJ 29, RK-G 136, RK-G 138
Plug adaptor PC-234S, PC-236MS .
The above optional accessories are not provided in some areas.
Design and specifications are subject to change without notice.
Advertisement
