Advertisement
Customers in the U.S.A.
http://www.sony.comlwalkmansupportt
Customers in Canada
http://www.sony.calEletronicsSupportl
For the customers in the U.S.A.
Important Safety Instructions
I) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat
registers. stoves, or other apparatus (including amplifiers)
thal produce heat.
9) Do not defeat the safely purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outle£.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles. and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod. bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a can is used, use caution when moving the cartl
apparatus combination to avoid injury from tip-over.
I)
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture. does not
operate nonnally. or has been dropped.
)t
Disposal of Old Electrical
&
Electronic
Equipment (Applicable in the European
Union and other European countries with
separate collection systems)
This symbol on the product or on its packaging
_
~no~~:~~~h:~:~~~ r:~~~\:~~~I~~~~a~~:~e~v~~
to
the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural resources.
For more detailed infonnation about recycling of this product.
please contact your local Civic Office, your household waste
disposal service or the shop where you purchased the product.
)t
Disposal of waste batteries (applicable in
the European Union and other European
countries with separate collection
systems)
This symbol on the battery or on the packaging indicates that the
battery provided with this product shall not be treated as
household waste.
By ensuring these batteries are disposed of correctly, you will
help prevent potentially negative consequences for the
environment and human health which 'could otherwise be caused
by inappropriate waste handling of the battery. The recycling of
the materials will help to conserve natural resources.
In case of products that for safety, perfonnance or data integrity
reasons require a pennanent connection with an incorporated
battery, this battery should be replaced by qualified service staff
only.
To ensure that the battery will be treated properly, hand over the
product at end-of-life to the applicable collection point for the
recycling of electrical and electronic equipment.
For all other batteries, please view the section on how to remove
the battery from the product safely. Hand the battery over to the
applicable collection point for the recycling of waste batteries.
For more detailed infonnation about recycling of this product or
battery, please contact your local Civic Office, your household
waste disposal service or the shop where you purchased the
product.
Card remote commander
(See fig.
m-@I
(I]
D*
(muting) button
[gJ
VOL (volume) +1- buttons
~
c' ; >
(power) button
The operating distance of the card remote commander is approx.
5 m in maximum.
Power sources
Using on house current
(See fig.
ml
Connect the AC power adaptor to the system.
Notes on the AC power adaptor
Use only the supplied AC power adaptor. Do not use any
other AC power adaptor to avoid damaging the speaker.
~
Polarity 01 the plug
Before connecting or disconnecting the AC power adaptor,
turn off the system. Otherwise, it may cause a malfunction.
Hooking up the speakers
(See fig. [!II
1
Connect the speakers and the source
device.
When the system is connected to the
monaural jack of the source device
The sound may not come through the right speaker. In such a
case, use the optional* plug adaptor PC-236MS.
To connect to a stereo phone-type
headphones jack
Use the optional* connecting cord RK-G22 or connecting cord
RK-G 136 and plug adaptor PC-234S"
* The above optional accessories are not provided in some areas.
Installing a lithium battery
in the card remote
commander
(See fig. OJI
1
Take out the battery case.
2
Insert an optional lithium battery CR2025
with the + side facing up.
3
Place the battery case back In position.
When to replace the lithium battery
The working distance of the card remote commander shortens as
the battery becomes exhausted.
Replace the battery with a new one. It will last about 6 months
in normal.
Notes on the lithium battery
• Keep lhe lithium battery out of the reach of children. Should the
battery be swallowed, immediately consult a doctor.
• Wipe the battery with a dry cloth to assure a good contact.
• Be sure to install the baltery with the correct polarity.
• Do not hold the battery with metallic tweezers as doing so may
cause a shan-circuit.
• Use of other batteries than the
CR202S
may cause a risk of fire or
explosion.
WARNING
Battery may explode if mistreated. Do not recharge,
disassemble or dispose of in fire.
Listening to the sound
1
Press the
<.' >
button to turn on the unit.
The
Q)
indicator lights up.
2
Start playing on the source device.
3
Adjust the volume.
Set the volume of the source device to moderate level, and
press the VOL +1- button on this unit.
"Q"Tlp
To silence the sound. press the
0:5.<
button on the card remote
commander. To resume the sound, press the button again.
Note
A beep sounds when the volume is set to minimum or
maximum.
4
Press the
<.' >
button to turn off the unit after
use.
The
Q)
indicator goes off.
Notes
• If
both the device connected to the INPUT 1jack and the one
connected
10
the LNPUT 2 jack are played at the same time, both
sounds can be heard.
• If connecting the speaker to a device with a built-in radio or tuner,
radio reception may not occur or sensitivity may be reduced
significantly.
• If the source device has a bass boost function or equalizer function,
set them to off. If these functions are on, sound may be distorted.
• If the source device's headphone output has a line switch, better
sound will be heard if it is sel to on. See the operating instructions
of the source device.
Advertisement
